Features of Continuous Emission Monitoring System BI 7000 NDUV
,
April 7, 2024 - by Anand Naik

Check these important features of Agasthya 2013 Series Continuous Emission Monitoring System BI 7000 NDUV

Continuous emission monitoring systems (CEMS) are critical components in industrial settings. They analyze the gas concentrations and record the same for later review. The Agastha 2013 Series Continuous Emission Monitoring System BI 7000 NDUV is one such CEMS analyzer. It can analyze the concentration of multiple gasses in the environment.

It is a highly accurate system that also ensures a long life. The analyzer can house up to 8 gas sensors at a time and it has scalable ranges for specific gasses.  

  • Features

You can expect the following features from this analyzer –  

  • The technology has undergone several trials and tests to ensure reliability of performance. 
  • Scalability ranges are available for each gas that is to be measured. 
  • The analyzer comes with a 5.7-inch TFT keypad display.  
  • The design of the analyzer has been optimized while prioritizing user requirements.
  • Unit programmable in ppm & mg/Nm³
  • It has RS 485, MODBUS protocol
  • Extremely efficient drain and automatic purge systems available.
  • Remote Calibration Unit and an inbuilt interface for it.
  • Auto & semi auto calibration facilities
  • Applications

The Agastha 2013 Series Continuous Emission Monitoring System BI 7000 NDUV can have diverse applications in various sectors. The following are some of its industrial applications –  

  • Aluminum
  • Distillery
  • Cement
  • Chlor alkali
  • Fertilizers
  • Oil refinery
  • Petrochemical
  • Iron & steel
  • Pharmaceuticals
  • Thermal power plants
  • Power plants
  • Pulp & paper
  • Zinc
  • Sugar
  • Boiler
  • Copper
  • Common hazardous waste incinerator
  • Biomedical waste incinerator
  • Specifications

Here are some of the most important specifications for the CEMS gas analyzer – 

  • It features a Non Dispersive Ultraviolet Spectroscopy (NDUV) sensor technology
  • The analyzer can measure NO2, SO2, Cl2 and H2S gasses
  • It requires a 110/230 VAC, 50 Hz power supply.
  • The heated sampling probe in the system can operate in temperatures of up to 400 degree Celsius. 
  • The device has a Flange type. 2”, 150# rating RF mounting
  • For the heated sample gas line, the process tube is PTFE/SS and the size of the tube is 1/4 inch OD.
  • The operating voltage for the heated sample gas line is 230V AC.
  • The maximum operating temperature for this line is 200 degree Celsius. 
  • The system also comes with a drain pump to remove condensates continuously.

Looking for a CEMS gas analyzer?

Explore our CEMS analyzer collection. We offer – 

  • Integrated Continuous Emission Monitoring System with SCU & Heated Probe & Sample Tubing
  • Agasthya 2013 Series Continuous Emission Monitoring System BI 7000
  • Agasthya 2013 Series Continuous Emission Monitoring System BI 7000 NDIR

Also, explore our gas and liquid analyzing solutions. Our company was formed in 2006 to manufacture high-quality liquid and gas analytics for industrial settings. We are an ISO 9001:2015 Certified company.  

,