Smart Gas Transmitter 1X Series BI 500
Bhoomi BI500 – 1X Series Smart Gas Transmitter is a Single Gas Transmitter comprising of transmitter and sensor which detects Flammable, Toxic and Oxygen gas present in Industrial & Commercial premises and provides Audio and Visual alarm indication for Industrial and Human safety. It is designed to use hazardous & non-hazardous area.
It is 3 wire transmitter with 4-20 mA, Modbus and Relay output. Electrochemical, Infrared and Pellistor technology based sensors used for detection of Flammable, Toxic and Oxygen gases. 1.8” TFT Graphic LCD Display provides information about gas type, concentration, unit, alarm set point, temperature and time.
The transmitter enclosure has three threaded entries. The two cable/conduit entries either side of the upper part of the transmitter housing are for connecting the power source, signal output and relay contacts to associated signalling equipment. The bottom entry allows direct connection of the sensor socket.
- Visual & Audio Alarm
- Non-intrusive calibration using magnetic wand
- 1.8″ TFT Graphic LCD Display
- Advance Intimation for Cal. due date
- Bump Test
- Sensor Life Estimation
- Industry standard 4-20mA analog signal output
- Fully configurable on-board potential free relay contact
- Inbuilt ambient temperature sensor
- User settable alarm set-points
- Provision to mute relay output
- Force-testing of alarm and relays
- Digital communication by RS 485
- CIMFR/ PESO/ ATEX certified to Exd IIC T6, IP66
- Sensor Technology
- Electrochemical (EC), Pellister, NDIR
- Measurement Gas
- Oxygen, Combustible & Toxic Gases
Acetylene (C2H2)
Acrylonitrile (CH2CHCN)
Ammonia (NH3)
Butanol (C4H9OH)
Carbon Dioxide (CO2)
Carbon Disulfide (CS2)
Carbon Monoxide (CO)
Chlorine (Cl2)
Formaldehyde (CH2O)
HC (Methane – CH4)
Hydrogen (H2)
Hydro Carbon (HC)
Hydrogen Cyanide (HCN)
Hydrogen Chloride (HCl)
Hydrogen Fluoride (HF)
Hydrogen Sulphide (H2S)
Mercaptan
LPG
Nitrogen Dioxide (NO2)
Oxygen (O2)
Ozone (O3)
Phosphine (PH3)
Phosgene (COCl2)
Styrene (C8H8)
Sulphur Dioxide (SO2)
Vinyl Chloro Monomer (C2H3Cl)
VOC (Isobutylene) (C4H8)
- Power
- 15 – 28 VDC (Typically 24 VDC)
- Power Consumption
- Max. 5 Watts
- Display
- TFT LCD Graphic Display
- Output
- 4 – 20 mA Analog Output & 3 Nos. Relay Output
- Digital Interface
- RS 485 Protocol Modbus
- Operating Temperature
- -20⁰C to 60⁰C
- Operating Pressure
- Ambient +/-10%
- Operating Humidity
- 0-95% RH (non-condensing)
- Mounting
- Wall, Pole
- Response Time
- < 90 seconds
- Transmitter MOC
- Flameproof – cast aluminium alloy or SS-316 on request
- Sensor Enclosure MOC
- SS316
- Sensor Filter Type
- Sintered Filter
- Ingress protection
- IP 66
- Cable Entries
- 2 Nos. M20
- Transmitter Size
- 250 mm X 170 mm X 105 mm
- Certification
- CIMFR/ PESO/ ATEX certified to Exd IIC T6, IP66
- Oil & Gas
- Refineries & Petrochemical plants
- Chemical Pant
- Pharmaceutical
- Power Industries
- Pollution monitoring
- Waste water treatment plants
- Printing
- Iron and steel plants
- Fertilizer Plant
- Tunnels & car parking areas
- Confined space
- Printing Industries
- Ammonia Refrigeration
- Duct Monitoring
- Marine
- Military & national security
- Pulp & Paper Industry
- Semiconductor
- Photovoltaic
- Building & Construction
Want to know more about our products and offerings? feel free to reach out....
x
